Resolve “Default Boot Device” missing error on Lenovo PC
The Default Boot Device missing error is a problem that can appear on your Lenovo laptop due to problems during the startup. The error message “Default Boot Device” appears on Lenovo PC on rare occasions due to the changes made to the BIOS settings for your PC. This error can mostly be resolved immediately by accessing the BIOS settings for Lenovo PC.
Need help with a different problem? Lenovo repair Gold Coast is at your disposal 24x7, so contact
us now.
Follow the steps mentioned below in this article by Lenovo service center Gold Coast to resolve the Default Boot device
error.
Steps to resolve “Default Boot Device”
missing error on Lenovo PC
1.
Restart your Lenovo PC by selecting
RESTART from the power options of the PC.
2.
Press the F2 key once you see the
initial start-up screen of the Lenovo logo on your PC.
3.
You will be taken to the BIOS set up
screen immediately.
4.
In case the BIOS set-up screen did not
appear, the actual key use to access bio set up may be different for your
Lenovo model.
5.
Once you are on the bio set up menu
select the boot tap from the screen and then hit ENTER.
6.
Check the BOOT ORDER carefully and
ensure that the hard drive for the Lenovo PC is in the first slot.
7.
Else, Swap the order for the boot device
and move your hard disk to the first slot.
8.
Select the BOOT MODE option by
highlighting it and then hit the enter key.
9.
This will swap the UEFI to LEGACY
SUPPORT.
10.
Now, head to the EXIT SAVING CHANGES tab
and select it by highlighting it.
11.
You will exit the BIOS setup after
hitting the ENTER key.
12.
Now, restart your Lenovo PC to save the
changes.
Comments
Post a Comment